
The inductor in a LC oscillation has a maximum potential difference of 16V and maximum energy of 640$\mu $J. Find the value of capacitor in $\mu $F in LC circuit.
A) 5$\mu $F
B) 6$\mu $F
C) 7$\mu $F
D) 8$\mu $F
Answer
219k+ views
Hint:When inductor and capacitor are connected in an ideal circuit their energies are equal:
$E = \dfrac{1}{2}C{V^2}$ (C is the capacitance of the capacitor and V is the voltage)
Or it can be written as:
$E = \dfrac{1}{2}\dfrac{{{Q^2}}}{C}$ (As Q=CV)
Energy E is calculated in joules, when C is calculated in farads, V is in volts and Q is in coulombs.
Complete step by step solution:
Let us know first why the inductor and capacitor have the same energies and then we will proceed for the calculation.
In an oscillator circuit we assume the ideal conditions; under ideal conditions there will be no loss of energy and secondly, there is no resistor in the circuit then no other energy loss will take place.
Also, the inductor and capacitor are connected in parallel in an LC oscillator circuit which means both inductor and capacitor have the same potential difference.
Let’s come to the calculation part now:
We have
$ \Rightarrow E = \dfrac{1}{2}C{V^2}$
On substituting the values of given numerical quantities in the above equation.
$ \Rightarrow 640 \times {10^{ - 6}} = \dfrac{1}{2}C{(16)^2}$
Energy was given in micro joules then we multiplied it by 10-6
$ \Rightarrow C = \dfrac{{640 \times {{10}^{ - 6}} \times 2}}{{{{(16)}^2}}}$
On doing further calculations:
$
\Rightarrow C = \dfrac{{1280 \times {{10}^{ - 6}}}}{{256}} \\
\Rightarrow C = 5 \times {10^{ - 6}} \\
$
Value of the capacitor is 5 microfarad.
Option (A) is correct.
Note:Charge stored on a capacitor cannot change abruptly; it takes some time to change from one state to another. And this behaviour of capacitors is called transient behaviour. When a capacitor has no charge on it acts as a short circuit in the circuit and when the capacitor gets charged it behaves as an open circuit.
$E = \dfrac{1}{2}C{V^2}$ (C is the capacitance of the capacitor and V is the voltage)
Or it can be written as:
$E = \dfrac{1}{2}\dfrac{{{Q^2}}}{C}$ (As Q=CV)
Energy E is calculated in joules, when C is calculated in farads, V is in volts and Q is in coulombs.
Complete step by step solution:
Let us know first why the inductor and capacitor have the same energies and then we will proceed for the calculation.
In an oscillator circuit we assume the ideal conditions; under ideal conditions there will be no loss of energy and secondly, there is no resistor in the circuit then no other energy loss will take place.
Also, the inductor and capacitor are connected in parallel in an LC oscillator circuit which means both inductor and capacitor have the same potential difference.
Let’s come to the calculation part now:
We have
$ \Rightarrow E = \dfrac{1}{2}C{V^2}$
On substituting the values of given numerical quantities in the above equation.
$ \Rightarrow 640 \times {10^{ - 6}} = \dfrac{1}{2}C{(16)^2}$
Energy was given in micro joules then we multiplied it by 10-6
$ \Rightarrow C = \dfrac{{640 \times {{10}^{ - 6}} \times 2}}{{{{(16)}^2}}}$
On doing further calculations:
$
\Rightarrow C = \dfrac{{1280 \times {{10}^{ - 6}}}}{{256}} \\
\Rightarrow C = 5 \times {10^{ - 6}} \\
$
Value of the capacitor is 5 microfarad.
Option (A) is correct.
Note:Charge stored on a capacitor cannot change abruptly; it takes some time to change from one state to another. And this behaviour of capacitors is called transient behaviour. When a capacitor has no charge on it acts as a short circuit in the circuit and when the capacitor gets charged it behaves as an open circuit.
Recently Updated Pages
A square frame of side 10 cm and a long straight wire class 12 physics JEE_Main

The work done in slowly moving an electron of charge class 12 physics JEE_Main

Two identical charged spheres suspended from a common class 12 physics JEE_Main

According to Bohrs theory the timeaveraged magnetic class 12 physics JEE_Main

ill in the blanks Pure tungsten has A Low resistivity class 12 physics JEE_Main

The value of the resistor RS needed in the DC voltage class 12 physics JEE_Main

Trending doubts
JEE Main 2026: Application Form Open, Exam Dates, Syllabus, Eligibility & Question Papers

Derivation of Equation of Trajectory Explained for Students

Hybridisation in Chemistry – Concept, Types & Applications

Understanding the Angle of Deviation in a Prism

Understanding Collisions: Types and Examples for Students

Understanding Atomic Structure for Beginners

Other Pages
JEE Advanced Marks vs Ranks 2025: Understanding Category-wise Qualifying Marks and Previous Year Cut-offs

How to Convert a Galvanometer into an Ammeter or Voltmeter

Understanding Centrifugal Force in Physics

JEE Main Marking Scheme 2026- Paper-Wise Marks Distribution and Negative Marking Details

Degree of Dissociation: Meaning, Formula, Calculation & Uses

Understanding Electromagnetic Waves and Their Importance

