Answer
409.2k+ views
Hint: An LCR circuit is an electrical circuit consisting of a resistor, inductor, Capacitor, connected in series or in parallel. To find out power dissipation in circuit, first of all we have to calculate total impedance using $ Z=\sqrt{{{(R)}^{2}}+{{({{X}_{C}}-{{X}_{L}})}^{2}}} $ and after that power factor,
$\Rightarrow \cos \phi =\dfrac{R}{Z} $ . Putting these values in $ P={{E}_{v}}{{I}_{v}}\cos \phi .t $ this relation to find out power dissipated in the circuit.
COmplete step by step solution
Here, $ R=60\Omega $
$\Rightarrow L=20mH $
$\Rightarrow 1H=1000mH $ $ \therefore $ $ L=20\times {{10}^{-3}}H $
$\Rightarrow C=120\mu F $
$\Rightarrow 1F={{10}^{6}}\mu F $ , $ \therefore C=120\times {{10}^{-6}}F $
$\Rightarrow \nu =50Hz,{{E}_{\nu }}=24V,{{I}_{\nu }}=?,{{P}_{{}}}=? $
Impedance in case of LCR circuit is given as:
$ \begin{align}
&\Rightarrow Z=\sqrt{{{R}^{2}}+{{\left( {{X}_{L}}-{{X}_{C}} \right)}^{2}}} \\
& where,X{}_{L}=\omega L \\
&\Rightarrow {{X}_{C}}=\dfrac{1}{\omega C} \\
\end{align} $ $ \to (1) $
To find out the value of $ \omega $ we will use $ \omega =2\pi \nu $ relation. Now, put all the values in this relation.
$ \begin{align}
&\Rightarrow 2\times \pi \times 50 \\
&\Rightarrow 100\pi \\
\end{align} $
Now, use this value to find out $ {{X}_{L}}and{{X}_{C}} $
$ \begin{align}
&\Rightarrow {{X}_{L}}=\omega L \\
&\Rightarrow 100\pi \times 20\times {{10}^{-3}} \\
&\Rightarrow 2\pi \Omega \\
\end{align} $
And,
$ \begin{align}
&\Rightarrow {{X}_{C}}=\dfrac{1}{\omega C} \\
&\Rightarrow \dfrac{1}{100\pi \times 120\times {{10}^{-6}}} \\
&\Rightarrow \dfrac{{{10}^{6}}}{12000\pi } \\
&\Rightarrow \dfrac{{{10}^{3}}\times 7}{12\times 22} \\
&\Rightarrow \dfrac{7000}{264}=26.51\Omega \\
\end{align} $
Now, find the difference between $ {{X}_{C}}and{{X}_{L}} $
$ \begin{align}
&\Rightarrow {{X}_{C}}-{{X}_{L}}=26.51-2\pi =26.51-2\times \dfrac{22}{7} \\
&\Rightarrow 26.51-6.28=20.23\approx 20 \\
\end{align} $ $ $ $ \to (2) $
Put the value of R and equation (2) in equation (1)
We get, $ \begin{align}
&\Rightarrow \sqrt{{{(60)}^{2}}+{{(20)}^{2}}} \\
&\Rightarrow \sqrt{3600+400}=\sqrt{4000}=20\sqrt{10}\Omega \\
\end{align} $
$\Rightarrow Z=20\sqrt{10}\Omega $
Power factor is given by:
$\Rightarrow \cos \phi =\dfrac{R}{Z} $
$\Rightarrow \dfrac{60}{20\sqrt{10}}=\dfrac{3}{\sqrt{10}} $
$ $ Average power dissipated/cycle in RLC circuit is given by: $ P={{E}_{\nu }}I{}_{\nu }\cos \phi $ $ \to (A) $
And, $ {{I}_{\nu }}=\dfrac{V}{Z} $
$\Rightarrow \dfrac{24}{20\sqrt{10}}=\dfrac{6}{5\sqrt{10}} $
Now, put all the values in equation (A)
$\Rightarrow P=24\times $ $ \dfrac{6}{5\sqrt{10}}\times \dfrac{3}{\sqrt{10}} $
$\Rightarrow \dfrac{24\times 6\times 3}{5\sqrt{10}\sqrt{10}}=\dfrac{432}{50}=8.64Watt $
$ \begin{align}
&\Rightarrow Q=P.t=8.64\times 60 \\
&\Rightarrow 5.18\times {{10}^{2}}J \\
\end{align} $
$ \therefore $ Option (2) is correct.
Note
RLC circuits have many applications as oscillator circuits. It can be used as filters, tuned circuits etc. While doing numerical be careful with the S.I. units. Concept of impedance and voltage should be clear. For more information refer to chapter Alternating circuit.
$\Rightarrow \cos \phi =\dfrac{R}{Z} $ . Putting these values in $ P={{E}_{v}}{{I}_{v}}\cos \phi .t $ this relation to find out power dissipated in the circuit.
COmplete step by step solution
Here, $ R=60\Omega $
$\Rightarrow L=20mH $
$\Rightarrow 1H=1000mH $ $ \therefore $ $ L=20\times {{10}^{-3}}H $
$\Rightarrow C=120\mu F $
$\Rightarrow 1F={{10}^{6}}\mu F $ , $ \therefore C=120\times {{10}^{-6}}F $
$\Rightarrow \nu =50Hz,{{E}_{\nu }}=24V,{{I}_{\nu }}=?,{{P}_{{}}}=? $
Impedance in case of LCR circuit is given as:
$ \begin{align}
&\Rightarrow Z=\sqrt{{{R}^{2}}+{{\left( {{X}_{L}}-{{X}_{C}} \right)}^{2}}} \\
& where,X{}_{L}=\omega L \\
&\Rightarrow {{X}_{C}}=\dfrac{1}{\omega C} \\
\end{align} $ $ \to (1) $
To find out the value of $ \omega $ we will use $ \omega =2\pi \nu $ relation. Now, put all the values in this relation.
$ \begin{align}
&\Rightarrow 2\times \pi \times 50 \\
&\Rightarrow 100\pi \\
\end{align} $
Now, use this value to find out $ {{X}_{L}}and{{X}_{C}} $
$ \begin{align}
&\Rightarrow {{X}_{L}}=\omega L \\
&\Rightarrow 100\pi \times 20\times {{10}^{-3}} \\
&\Rightarrow 2\pi \Omega \\
\end{align} $
And,
$ \begin{align}
&\Rightarrow {{X}_{C}}=\dfrac{1}{\omega C} \\
&\Rightarrow \dfrac{1}{100\pi \times 120\times {{10}^{-6}}} \\
&\Rightarrow \dfrac{{{10}^{6}}}{12000\pi } \\
&\Rightarrow \dfrac{{{10}^{3}}\times 7}{12\times 22} \\
&\Rightarrow \dfrac{7000}{264}=26.51\Omega \\
\end{align} $
Now, find the difference between $ {{X}_{C}}and{{X}_{L}} $
$ \begin{align}
&\Rightarrow {{X}_{C}}-{{X}_{L}}=26.51-2\pi =26.51-2\times \dfrac{22}{7} \\
&\Rightarrow 26.51-6.28=20.23\approx 20 \\
\end{align} $ $ $ $ \to (2) $
Put the value of R and equation (2) in equation (1)
We get, $ \begin{align}
&\Rightarrow \sqrt{{{(60)}^{2}}+{{(20)}^{2}}} \\
&\Rightarrow \sqrt{3600+400}=\sqrt{4000}=20\sqrt{10}\Omega \\
\end{align} $
$\Rightarrow Z=20\sqrt{10}\Omega $
Power factor is given by:
$\Rightarrow \cos \phi =\dfrac{R}{Z} $
$\Rightarrow \dfrac{60}{20\sqrt{10}}=\dfrac{3}{\sqrt{10}} $
$ $ Average power dissipated/cycle in RLC circuit is given by: $ P={{E}_{\nu }}I{}_{\nu }\cos \phi $ $ \to (A) $
And, $ {{I}_{\nu }}=\dfrac{V}{Z} $
$\Rightarrow \dfrac{24}{20\sqrt{10}}=\dfrac{6}{5\sqrt{10}} $
Now, put all the values in equation (A)
$\Rightarrow P=24\times $ $ \dfrac{6}{5\sqrt{10}}\times \dfrac{3}{\sqrt{10}} $
$\Rightarrow \dfrac{24\times 6\times 3}{5\sqrt{10}\sqrt{10}}=\dfrac{432}{50}=8.64Watt $
$ \begin{align}
&\Rightarrow Q=P.t=8.64\times 60 \\
&\Rightarrow 5.18\times {{10}^{2}}J \\
\end{align} $
$ \therefore $ Option (2) is correct.
Note
RLC circuits have many applications as oscillator circuits. It can be used as filters, tuned circuits etc. While doing numerical be careful with the S.I. units. Concept of impedance and voltage should be clear. For more information refer to chapter Alternating circuit.
Recently Updated Pages
Mark and label the given geoinformation on the outline class 11 social science CBSE
![arrow-right](/cdn/images/seo-templates/arrow-right.png)
When people say No pun intended what does that mea class 8 english CBSE
![arrow-right](/cdn/images/seo-templates/arrow-right.png)
Name the states which share their boundary with Indias class 9 social science CBSE
![arrow-right](/cdn/images/seo-templates/arrow-right.png)
Give an account of the Northern Plains of India class 9 social science CBSE
![arrow-right](/cdn/images/seo-templates/arrow-right.png)
Change the following sentences into negative and interrogative class 10 english CBSE
![arrow-right](/cdn/images/seo-templates/arrow-right.png)
Advantages and disadvantages of science
![arrow-right](/cdn/images/seo-templates/arrow-right.png)
Trending doubts
Difference between Prokaryotic cell and Eukaryotic class 11 biology CBSE
![arrow-right](/cdn/images/seo-templates/arrow-right.png)
Which are the Top 10 Largest Countries of the World?
![arrow-right](/cdn/images/seo-templates/arrow-right.png)
Fill the blanks with the suitable prepositions 1 The class 9 english CBSE
![arrow-right](/cdn/images/seo-templates/arrow-right.png)
Differentiate between homogeneous and heterogeneous class 12 chemistry CBSE
![arrow-right](/cdn/images/seo-templates/arrow-right.png)
Difference Between Plant Cell and Animal Cell
![arrow-right](/cdn/images/seo-templates/arrow-right.png)
10 examples of evaporation in daily life with explanations
![arrow-right](/cdn/images/seo-templates/arrow-right.png)
Give 10 examples for herbs , shrubs , climbers , creepers
![arrow-right](/cdn/images/seo-templates/arrow-right.png)
Write a letter to the principal requesting him to grant class 10 english CBSE
![arrow-right](/cdn/images/seo-templates/arrow-right.png)
How do you graph the function fx 4x class 9 maths CBSE
![arrow-right](/cdn/images/seo-templates/arrow-right.png)